Showing posts with label bike racing. Show all posts
Showing posts with label bike racing. Show all posts

Tuesday, December 23, 2008

"When I Say Spin, You Best Spin, Muthafucka"

Pardon the allusion to the classic new wave track "Dance Mother Fucker Dance" by The Violent Femmes (though it's more of the rock-a-billy genre).

Spinning is a time-honored practice in bicycle racing. Coaches will demand your base miles all be done in the small chainring. This is mostly to ensure you don't damage anything from trying to push a hard gear when you don't have the base miles, but it also means you have to turn a high cadence to go fast. Developing leg speed is a crucial aspect of bike racing.

They will advocate riding rollers at a high cadence to smooth out your pedal stroke and keep you riding smooth straight lines. This can be accomplished with stationary trainer, but it's easy to get sloppy at a high spin on a stationary trainer, and it doesn't really do anything for your fitness if you don't have to worry about keep the bike up. No, spinning classes don't help with spinning the pedals on a road bike, unless you're starting from scratch. Even the Great Eddy Merckx loathed stationary trainers for anything other than warming up. His famous quip on the subject was 'all you learn from riding a wind trainer is how to pedal squares'. They didn't have magnetic or fluid trainers in his day, but the concept is the same. Sitting on a stationary trainer (as opposed to rollers) allows you, and almost coerces you, pump your legs up and down, not pedal circles. (OK, I know it isn't exactly what he said, but it's the gist, and he did use the term 'pedal squares'. If you're anal enough to worry about the exact phrase over the intent, then I suggest you shut the fuck up and get on a set of rollers).

This brings me to the actual subject of this post: Fixed Gear Training.

I'm not talking about track racing, I'm talking about riding a fixed gear bike with a ratio in the low to mid 2s for a few hours at a time on the road.

My Friend and fellow blogger Exemplar Solobreak has a post on power training, where he referenced the idea of mashing a big gear over varied terrain as a training tool.

But, That's something to be saved for later, _after_ you develop your base miles.

It's winter. When the roads are clear, I love riding a fixed gear. Last year was tough since it snowed so early and we had snow on the ground from the day after thanksgiving through the end of march. This year does'nt look much better for winter miles so far, but you know what they say about new england weather, all this snow could be gone next week (though I find it highly unlikely)

So, let's talk about riding one gear, no coasting, trying to keep a cadence of about 100 rpm on flat ground, while keeping your HR in the low aerobic range, about 80%, for two to three hours.

This teaches you several things:
1) Spinning a cadence on a fixed gear makes you pedal a circle. If you have a bad pedal stroke, keeping the bike smooth and steady as you zip along at a higher cadence - say 120 - will bounce you all over the road.
2) It prevents you from taking it too easy. If you want to get home, you have to push the gear. No coasting, no shifting up/down on the hills,
3) It teaches you to be attentive - while I personally would _never_ go out on the open road without two working brakes, it's a good learning experience for keeping your pace steady, especially when riding with a group.

Of course, the right gear for your area is essential. in flat areas, like where Solo lives, you can get away with a heavier gear, possible something pushing a 3.0 ratio. Where I live, we have a lot more rolling hills with some short steep climbs. I've been using a 42/16 for almost 20 years (2.625:1). I can ride most of the local hills and still keep my cadence over 70, and they aren't long enough to horribly stress my knees.

This brings us to another aspect of fixed-gear training. Depending on the route, I can pick out hilly route to work on power, or longer flat routes to just work on base miles. Of course, the hilly routes are much shorter in duration, and the beauty of the smaller gear is that I can get an effective warm-up/cool-down by spinning to and from the hills I want to work out on.

Conversely, on some of the _downhills_, in isn't uncommon to spin up to 160 rpm. This brings me to a question I'd like to ask from anyone who may skim past this blog that has any knowledge on the issue. The question is 'spinning vs. being spun'.

A coach that I hooked up with a few years ago was not a fan of fixed gear training. He felt that it didn't really teach you to spin a high cadence smoothly, since usually the high cadences one experiences on a fixed gear occur on the down hills. He said, there is a big difference between spinning and being spun. I think I see his point, but I think it's relative minor. I think the benefits of fixed gear training vastly outweigh any detriment from 'being spun' on a downhill, and I also think there is a benefit to letting the bike push your leg speed up past the 160 rpm range. I think that pushing your legs in a circle at that speed is something that _must_ be done consciously, and therefore it _does_ teach you how to spin your legs smoothly.

Did you notice how many times I wrote "I think" in that last paragraph? Hell, I'm not a coach, and I'm quite mediocre as a bike racer, so it doesn't really matter what I _think_.

Tell me what _you_ think. Any professional coaches that may wander this way are especially welcome.

Monday, June 30, 2008

The Hardware - Cube Aerium

Behold - The Aerium.



This is one odd egg. This is a strict TT frame, with bladed seat stays, down tube, and head tube. The ride is quite smooth and very stable. This is a TT frame for road racers (as opposed to tri-geeks). I got it wicked cheap, second hand, from someone who bought it from the Mavic truck at the annual Pedro's sale a couple of years ago.

It was a bitch to set up. The big problem was the headset. It is a massive 1 1/2 inches, which may help with the stability. Where the big issue cropped up was that I have an old Easton EC90 for that I wanted to use, with a 1" steerer. So I have to find an adapter to go from 1 to 1 1/8, since I couldn't find a headset that that reduced from 1 1/2 to 1.


The other challenge was the seat post, a mere 30.8 mm. Sorry, I didn't happen to have one of those laying around.

Once I got all the parts, - the only other purchase was the bar-cons and stem - I set about putting thing together.

I had an old Scott Lite Flite drop bar, which I cut the ends off of and mounted upside down. I didn't want to spend another few hundred bucks on a TT specific bar set up, so I instead shopped around for the steepest reasonably weighted stem I could find. This Bontrager Select is 20 degrees. This way I could use my Syntace clip-ons. With a regular 10 degree stem I was still up too high, the 20 degree stem dropped me to a good level.



After all was said and done, the bike is actually comfortable. I took it out on a few hour long rides, working in hard efforts, and it _felt_ very fast. This was confirmed, last summer, when I came very close to setting a PR for average speed in a TT at the Working Mans Stage Race. Granted, I was very fit last year, but this is one of those cases where the bike - _I_ think - really did help One needs to remember that was the first competition TT I had done in about ten years that didn't involve a big hill at the end, the little 3 mile flat TT at the Bob Beal Stage Race not withstanding.

All in all, a good find, and I need to give a shout out to my friend Armand for setting me up with it.

Frame - Cube Aerium
Fork - ~2002 Easton EC90 full carbon
Wheels - Rolf Vector Pro
Crankset - Campy Veloce 46x39
Front Derailleur - Shimano 600
Rear Derailleur - Campy Chorus
Cassette - Sram 970 11x21
Saddle - Flite Ti

Friday, May 9, 2008

The Hardware - Tsunami!

Now that I figured the camera out, I can repost reasonable pics (good thought on the macro/ micro setting Solo, but that wasn't it (I've been had by that before as well). If you look closely at the pics it's obvious I was experiencing some latent DTs or something. I did some experimentation and it seems that the 'red eye' flash setting had some thing to do with it) of the main race bike; an '05 Tsunami Compact 3, full carbon frame and fork.



This isn't the best bike I've ever ridden. I think the fork rake is too steep (not enough trail?) since the bike is horrible to handle with no hands. It either leans over right away or breaks into a wobble. It does this regardless of the wheels on the bike. As long as I have my hands on the bars it's fine, and I have done descents pushing 60 MPH with no problems. I know it isn't me, since I can ride every other bike no handed with no problems.

Other than that, it's pretty light - 16.75 pounds as shown. It accelerates well, handles decently in criteriums, and rides comfortably. Not bad for $700 for the frame and fork.









I have it set up with campy chorus 9 speed, FSA BB and carbon crank (actually, Giant Team Issue from Chucks Bikes), Cane Creek headset and 200SL brakes, Easton EC 90 post and EA90 stem, ITM bar, Speedplay TI pedals, selle san marco saddle.

























The wheels shown are Mavic Gel 330 on Record hubs with Conti Sprinter 250 tubulars. I have a set of Zipp 303s with Tufo tubulars for hilly races. The Zipps drop the weight another few ounces.

Monday, April 28, 2008

A Blister In The Sun

As an amateur bike racer with the delusion that I might someday win a race of some significance (even in a local age-graded event) I generally approach exercise and diet with consideration of how it will affect my performance on the bike. I generally shy away from any sort of upper-body workouts, since they don’t translate into cycling performance very well. In the winter I’ve been known to do seated or stand rows, since the upper back gets used extensively in sprinting, although simply for tone and endurance - low weight/high reps. Other than that, I do crunches and back extension quite frequently, but everything else is from the waist down – squats, leg ext/flex, calf raises, running, snow shoes, indoor bike work outs, stairmaster, pliometrics, etc..

Now, for the typical office professional and home owner, this wouldn’t ordinarily represent a problem.

Welcome to My World.

About 5 years ago, my lovely and talented young wife and I decided to purchase a 100+ year old Victorian home. While it wasn’t a ‘fixer-upper’, It had suffered from at least ten years of abject neglect, with little ‘major’ maintenance before that. This did not bode well for a smaller dude who had purposely been avoiding upper-body workouts for the past 15 years. What I _did_ have in the way of shoulder and arm muscle mass was quite solid, very firm and tone, there just wasn’t very much of it. Sure, we could hire people, but we _are_ on some what of a budget.

The first test came in the form of the old pool deck. It consisted of 240 2 foot square by two inch thick concrete blocks. I had to move them all so the Italians could come in and pour a real deck. They weighed about 125 pounds each. I lifted them onto the back of a trailer (6 per trip) and then stacked them on the other side of the yard.

Then came the heating system. The house had a forced-hot water system that had started life as a steam system. In the interest of efficiency, those 100-year-old, six-inch-diameter, cast-iron pipes had to go when the new furnace got installed. I cut them up into 6 foot lengths, and hauled them outside. A few cast iron radiators were replaced with base board next, two from the second floor, again, hauled outside.

Then came the concrete. Lots and lots of concrete. The south fieldstone foundation was crumbling. We could either jack the house up and rebuild the wall, or build a form and pour a new concrete wall inside. Rebuilding was incredibly expensive, disruptive, and time consuming. Both engineers we consulted said pouring a wall would accomplish the same goal.

This time, I had my father to help me, and even though he’s in great shape far a 65 year old, he had just turned 65 (remember, I have no friends). We had 3 pallets – 180 bags, 80 pounds each, delivered. WE carried them into the basement one by one, since there was no place to leave them outside where they would not be exposed to the weather. Then we commenced to mixing. One bag at a time. Then pouring, one five gallon pail at a time, the last pallets worth had to hoisted up over the top of the form. Five solid days.

Next, came the retaining wall in the back yard. Dig a 40 foot trench over 4 feet deep (below the frost line, but we had a back hoe for that. Even still, there was a lot of shoveling involved), then stack two pallets worth of concrete block, then mix and pour two pallets of concrete to fill the block. Dad helped with that too. By the time that was done, it would have been twice as fast, a lot less work, and only marginally more expensive to build a floating block wall that would have looked ten times nicer than cinder block.

This past weekend was the garden. I rented a gas-powered tiller and fought with that bitch for two hours, then proceeded to excavate and fill the area with five yards of loam, with a shovel.

So, I do one of these events about once a year. I’m a little sore today. I hope that’s all my lovely and talented young wife has in mind this summer. My shoulders are starting to get a little too big.

Friday, April 11, 2008

Back to it/The Hardware - Old Faithful

OK, I realize, this is supposed to be a blog about cycling. In fortunately, in light of my recent injury, There hasn't been a whole helluva lot of that going on.

Last sunday, I tried sitting on the mag trainer for a while, easy gear, cadence ~80. I managed 45 minutes with no pain or discomfort. I went up to take a shower, and felt a slight burning sensation in my heel, and the swelling started soon after. I thought "great, I just set myself back a few weeks"

I went to the Dr on tuesday and got an 'all is going well' assessment. I'm out of the boot now, Her interpretation of the previous mag trainer workout was just that I over did it. Prescription: Short duration ~(20 min) low impact workouts and stretching. She suggested speed walking. She suggested, on a weekly basis upping the time by ten minutes. When I can get in an hour workout with no pain or swelling the next day, I can consider going back to a regular training schedule.

Which brings me to the first in another categories of blog entries: Bikes - The Hardware. I have currently nine (9) fully assembled and ridable bikes.

This entry features my favorite road bike - Old Faithful

This is a Merlin Road frame, Circa 1991. I have probably 50,000 miles on the frame. Currently, I use it as my commuter/weekday trainer.

Components:
wheels - Rolf Vector Comp
fork - Easton EC90 bars - Easton EC70 Stem - Easton EC70
post - Easton EC90 saddle - flite Ti
shifters - Campy Veloce Ergopower 9sp derailleurs - Campy Chorus Cassette - Sram 11-21
brakes - Campy Athena Crankset - Profile Designs Carbon 53/42




A few years ago I had it painted by Ted Wojcieck. It's held up OK, especially considering how well it's beat upon, and the fact that Titanium doesn't take paint very well. I love this bike. After riding something else, it always feels like I've come home. I can't say enough about the wheels, They've been commuter/trainers for about 8 years, and have a good 40,000 miles on them. The bearings are silky smooth (should be after all those miles) and I've never had to replace a spoke. Let me say, I don't exactly baby this thing. Yes, that's a fender. Since I commute on it, I ride alot when it's wet. I was amazed at how much better it is riding when you don't have water spraying up on your crotch.

This bike was one of my most satisfying purchases. This is one of the bikes I want to be buried with. Its ride is true and predictable, and exceptionally comfortable. It's one of the Tom Kellogg designed frames. I don't race it, really just because it doesn't have that out-of-the-saddle snap that you need for a good racing bike. Perhaps as I get older and _my_ snap ceases to be anything of interest I'll start racing on it again.




Thursday, February 28, 2008

finally getting to it

It struck me how this blog was supposed to be about cycling, yet to this point there has been absolutely _NO_ monologue about cycling.

Today, I will change that.

I recently came back from a week long trip to the mountains of north georgia, ostensibly a winter training camp. Seven men drove in a 25' motor home for 15 hours to a luxury cabin in the appalachian mountains, stayed for the week, then did the return trip.

We had:

A notorious and successful cat 3 (almost cat 2) who is possibly my regions best and most prolific race promoter.

Four master/3s of various abilities

A cat 1 and former member of the Junior National Team, albeit non-active for the past few years.

Me

Here's how the days of riding broke down:

Day Total Time Distance Avg. speed Elevation gain

1 2:16 35.69 15.7 4307

2 5:28 79.91 14.6 7560

3 4:20 66.13 15.2 7520

4 6:00 76.01 12.7 10998

5 3:33 54.75 15.4 5624

6 2:31 35.44 14 4422

Total 24:08:00 347.93 40431

Yup, that's right, 40 thousand feet of climbing in 6 days, almost 11000 of it in one 76 mile day.

To be fair, I didn't ride the last day, so I _only_ got 36,000 feet in.

"only".

I ended up straining my achilles' tendon on day 5. I certainly wasn't just that one day that did it, as I could feel it after the 11000 foot day. But it was enough to hobble me off the bike. It's been a week, and after resting and icing the ankle, I no longer have any pain for the first time. I'm going to try the stationary trainer tonight and see if it holds up.

Over the past 20 years, I experienced several recurring maladies which have conspired to keep me off the bike for a time that were _not_ results of crashes. Neck, shoulder, elbows, hands, back, knees, toes, quadriceps, even penile numbness, have all occurred more than once. Never have I had my achilles tendon flair up. And on this trip, I had slight cramping of the quads, but none of the other afore-mentioned pains, except for the achilles' tendon, which has never happened before.

These are two pictures of the driveway:


Come to find out it's about a 43 % pitch, No, that's not a typo, it's a 4, followed by a 3, the percent. Imagine riding 'home' to that after a 76 mile ride and 11000 feet of climbing.

Day two was the worst. Cold and rainy. I've never shivered that much on the bike. The only saving grace that day was being able to climb, since that warmed us up.

Here is the profile of the monster day (day 4):



Stats: 6:00 hours actual riding time
76.01 miles
10998 feet of climbing.

There was only one day where the temperature was appreciably above 50. That was day one and it was fucking beautiful, ~70, high thin clouds, no wind. The best we were able to muster after that was cloudy and in the 40's.

Epilogue:
It was overall a good time and we had fun. There was only one minor incident of people nerves flaring which was quickly resolved with apologies. And then there was the 'Boiled Egg Incident'.

One of the guys has a penchant for hard boiled eggs after a long ride. Whatever.

So on day 5 he puts a pot on the stove in the morning with 1/2 a dozen eggs in it.

Then we leave.

For over 4 hours.

We come back to a house filled with smoke, and exploded eggs _everywhere_. Some of the hard boiled bits landed a good 20 feet from the stove.

Of course, the guy whose name the house was in went ballistic. The rest of us pretty much waited outside until the yelling stopped. We were all laughing about it a few hours later.

I was clearly the least fit of the group. There was only one guy I was able to consistently beat to the tops of the climbs, and even then he stayed with the leaders a few times and beat me to the top. He weighs 215, I weigh 140. I suck.


Well, The better weather is approaching, and I'll be able to start riding to work in the next couple of weeks. That's the best training of all for me.

More on riding in the coming weeks!!!